A widely used in heavy-duty vehicles and mobile devices supporting equipment weight, adjust the level of machine a important hydraulic components is horizontal jack. It mainly used for factories and mines, transportation and other departments as a vehicle repair and other support and heavy work.

horizontal jack price and specific details are as follows: landing height

The use of horizontal jack

1, the use of such as empty phenomenon, to relax on the pump body put oil screw and the pump body vertical up head downward air a few times, then tighten put oil screw, you can continue to use.

2, use, shall not add partial load or overload, so as to avoid the danger of ultra high voltage electric jack. In a load, avoid the rapid joint discharge, so as to avoid the occurrence of accidents and damaged parts.

Oil as the medium, we must do a good job in oil and the machine maintenance 3, the machine, to avoid blockage or leakage, the effect use effect.

4, the a new or a long set of hydraulic jack, because there are more air cylinder memory, began using, the piston rod may appear tiny jump phenomenon, super high voltage electric jack no-load reciprocating motion 2-3 times to air out of the cavity. Long term idle electric jack, because seals don't work for a long time caused by hardening seal, thus affecting the service life of the ultra high voltage electric jack, so ultra pressure jack when not in use, the monthly super high voltage electric jack no-load reciprocating motion of 2-3 times.

5, high pressure oil pipe factory after 105Mpa (1050Kgf/cm2) test. But because the hose is easy to aging, so users need to check frequently, usually for six months, frequent users for three months. Check with 87.5Mpa (875Kgf/cm2) pressure test, such as blasting, uplift, leakage and other phenomena can not be used.

6, the operation should strictly comply with the technical specifications, the user should be regularly inspected and maintained according to the use of the situation.

with a jack must first read the instructions, but also should pay attention to the following questions:

1, the use of must be checked before each part is normal.

2, the use should be strictly abide by the provisions of the main parameters, should not exceed the overload, or when the height of the lifting or lifting of the tonnage of more than a specified cylinder, the top of the cylinder will be a serious oil spill.

3, such as insufficient amount of oil in a manual pump body, the need to pump added should be adequately filtered N32# hydraulic oil to work.

4, please refer to the instructions of the electric pump electric pump.

5, weight center of gravity to choose moderate, reasonable selection of point electric jack,