[Name]]: export-oriented high-strength polyester tensioner luggage tensioner

[Specification]: can be customized according to requirements

[Unit]: Article

[Material]: the drawstring is made of polyester resin fiber, and the tension clamp is made of iron for rust prevention.

[Tension]: Determined by specification

[Standard]: European standard EN12195-2 AS/NZS 4380

[Scope]:-40 ℃-100 ℃

[Safety factor]: 2:1

[Features]]:

1. This tensioner is used for fixed functions during transportation, movement, shipment or warehousing of goods;
2. Split design, manual tensioner with manual buckles use with lock Manual tightening, lock catch, cut off, easy and quick operation;
3. After locking, it will not fall off, safe, reliable, lightweight, easy to operate, and protect objects from damage;
4. The raw material has a long service life (100% polyester yarn) and is moisture-resistant, which can prevent wind frost from damage to it;
5. This manual tensioner effectively solves the problem of loss and unsafety of goods caused by poor packing of goods during pulling for transport of the vehicle;
6. Lightweight, flexible, weight capacity large, strong corrosion resistance, straps made of 100% polyester fabric, good tensile strength, wear resistance, tensioner after heat treatment;
7. It is a must for traveling. It is used to lock the luggage in the roof rack and rear box. It can easily lock the luggage so that it will not shake in the car.

[Usage]]:
1. First loosen the spring on the tensioner and fix it;
2. Pass the rope on the tensioner through the object, and then pass the rope through the fixed place on the tensioner;
3. Then pull the special wrench, and gradually tighten the rope due to the anti-reversal effect of the ratchet;
4. When you release the tensioner, just pull the clamp spring on the wrench, and then pull out the rope.

[Precautions]]:

1. Only use tensioner without damage.

2. It cannot be overloaded.

3. Do not knot the ribbon.

4. When using, please keep the fabric away from sharp edges and corners to avoid wear or cutting.

5. Avoid twisting and twisting the tensioner.

6. Do not place objects on tensioners to avoid damage.

7. Do not use the tensioner as a load lifting adjustment.