Using














flashlight that
a, attention matters:
1, flashlight switch in the tail, press the button energized, again according to a power cut, the order cycle;
2, shift: this function is only suitable for modulating light flashlight, single file flashlight without this feature. 如果想调换档位，通电进入任意档，持续通电时间低于2秒就断电，则下次通电后换档，依次循环，通电3秒以上具有记忆功能，下次通电还是默认这个档位，建议轻触开关进行断电换挡更方便；
3、请按电筒要求使用合适的电池，请勿使用型号不对的电池，不然有烧坏电路的危险；
4、安装电池的时候正极先进入电筒，除了无极性手电筒装电池不分正负极外,其它手电筒反接不亮；
5、非专业人员请勿打开线路板，打开或处理过线路板不在保修范围；
6、本公司手电具有生活防水能力，一般雨淋不会出现问题，但不具备潜水功能，请勿携带此手电潜水或长时间放在水盆、浴缸；
7、为保持“O”型圈（密封胶圈）及螺纹旋动顺畅，请每年2-3次在其表面擦抹硅脂等。 One, long; and depletion, and: if illustrate the use of
lithium battery
you protection circuit batteries do not have to look at the following instructions, the following matters needing attention without protection circuit battery needs to pay attention to the
1 don't charge and discharge, or prone to leakage and scrap.
2 cannot battery electric quantity from the torch inside take out the battery, the battery remaining power will be timely charging, charging time in 3-5 hours, the charger indicator changes promptly removed, can not long time filled
3 time battery should electricity is saved, the normal in three months or so to charge and discharge times. Three,
warranty:
1 flashlight, warranty: three months warranty by the company sold flashlight, lifetime warranty. Three months of quality problems, free maintenance, free replacement parts (only with electronic components), man-made damage is not in the scope of the problem, three months later, free maintenance costs, charge replacement parts cost.
2, the battery warranty Description: battery is not refundable replacement, because of the particularity of the battery, electronic products, and due to the torch voltage, use method and buyers of proficiency and bring some problems, please pay attention to, please understanding! Three,
troubleshooting
our products before delivery to check, ensure shipment will have no problem, no problem, but in transit due to turbulence, such as damp, inevitably there are some problems, if there are light does not shine, or only light, please maintenance in the following way: please ensure that all threads tighten the loose flashlight before
repair, if the thread is not tightened may be the cause of
1, check the battery is not bright or dim light: ensure that the battery has power and load in the correct direction of the battery, do not use different brands of batteries, and battery do not mix;
2, determine the fault: unscrew the tail, exposing the battery cathode, with a metal key or tweezers like connecting the battery negative electrode and battery by the flashlight body exposed without oxidation part, to see if the light. If you can, is flashlight switch, please in step 3 are examined; if not light please check circuit warehouse and the circuit board is connected at the soldering whether open welding and weld if there is please re welding can solve the problem.
3, checking the tail cover switch: unscrew flashlight tail, you can see the switch copper cap of the outer ring with two concave point switch pressure ring, with scissors or rigid forceps in in the two concave points along the clockwise rotation, check switch pressure ring is loose, to ensure that the switch pressing ring tightly pressed on the switch, not loose.
4, such as in accordance with the above method still can not solve the problem, please send back the flashlight, we solve your problem, please contact us to ask for address sent back and sent back please write a note in the parcel indicate whether it is because of what the causes of rework, but also to write clear your return address, to avoid misunderstanding. Friendship
that we attach great importance to the buyer for every one of our evaluation, we will make every effort to do a good job in after-sales service, please do not arbitrarily for us to do the evaluation, which will allow us to very sad, look forward to your cooperation again!