5000g/1G 

1-unit conversion: g tl ct oz

2- LCD LCD white backlight display

3-the scale body is designed with super overload protection function

4-automatic shutdown power saving peeling function

5-with insufficient voltage and overload prompt function

6-use 2 AAA batteries

I. Operating Instructions: load the battery correctly according to the battery compartment instructions, and place the scale on a stable and windless table.

• Press the power button to turn on, wait for three seconds to display0.1 or0.01;
• place the items to be scaled on the scale and read after the value is stable;
• change the measurement unit according to the unit conversion key;
• press the power button to shut down when the machine is turned on.

2. Buckle weight

• Power on according to the above steps;
• place the buckle weight on the scale;
• press the Peel button to display0.1 or0.01, indicating that the weight has been deducted;
• then put the items to be weighed,? Towering barium mu?

III. Correction

1, start to zero;

2, press and hold the unit conversion key until it is displayed CAL, press the unit conversion key, and then flash the weight value later.

3, place the corresponding weight in the center of the scale, and later, display PASS, and then display the weight value. After the correction is completed, the weight can be weighed.

IV. Troubleshooting

The primary factor of inaccurate weighing or failure is insufficient battery power, incorrect calibration, overload or operation on non-horizontal plane. Please pay attention to the points mentioned above to correctly use and maintain your products.

• Do not display or display the power shortage symbol[LO] need to replace the battery;
• [EEEEE] overload, the overloaded items should be removed immediately;
• [o-ld] due to incorrect operation, the internal core components of the scale are damaged (such as impact, drop or overload). Please try to recalibrate. If the sensor is not seriously damaged, it can be used after recalibrating.
• Display88888, please work on a stable plane without vibration.

Precautions

• The maximum weighing range of this product should not exceed its maximum weighing range.+ 2%.
• Wearing it will permanently damage the product.
• This product cannot be exposed to extremely cold or extremely hot environment, and it can work well in normal environment, please before use, let the product adapt to a new environment for at least one hour.
• Before use, the internal components of the scale are preheated by weighing the weight several times when starting the machine, which will make the weighing more accurate.
• Putting the product in a clean environment, dust, moisture, vibration, airflow, or electromagnetic interference will have adverse effects on the stability and accuracy of the product. Take it lightly and put it gently. When weighing, place the items gently on the scale to avoid inaccurate weighing or damaging the internal parts of the scale.
• Because this product is a product with high precision, be very careful when using it to avoid vibration or falling.
• Used in windless horizontal plane.