[test method]
1. Tear open the aluminum plastic bag and take out the test paper. 2. Operate according to the model (urine should not be directly soaked in the observation area).
2.1 pattern: soak the white end of the early pregnancy test paper in urine (the liquid level shall not exceed the horizontal line) for 10 seconds;
2.2 card type: directly drop the urine into the sample hole, about 2-3 drops; 2.3 pen type: directly pour urine into the sampling area and hold for 5-10 seconds.
3. Lay the early pregnancy test paper flat for 1 minute and wait for the red strip to appear.
Observation results were observed within 4.5 minutes, and interpretation was invalid after 5 minutes.
[result interpretation]

The positive showed two red bands. One is in the control area (C) and the other is in the test area (T), indicating pregnancy.
The negative showed only a red band in the control area (C). No red bands appeared in the test area (T), indicating that the patient was not pregnant.
No red strip appears in the control area (C) for 5 minutes, indicating that the test fails or the test paper has failed.

\"Please read the product manual carefully or purchase and use it under the guidance of the medical staff\".