Real wood chair has its own unique style, solid wood furniture from natural raw materials, set in a natural essence, and the real show the distinctive taste of solid wood furniture, high-grade, thick, will enjoy a long history of the combination of Chinese traditional culture and modern fashion elements, into the design of furniture, given new connotation for furniture, the furniture design more humane, practical, modern and create a new fashion for solid wood furniture, furniture of new tide

   Contact number: 0579-85190608 15958956969

   Contact number: 13735713828 WeChat 13735713828

   WeChat: 15958956969

   QQ:   1178196503 

   Email address: shiyufurniture@hotmail.com

Additional instructions on process flow

 A, High temperature and high pressure cooking, gas drying, steam drying.  High temperature and high pressure cooking extracted wood content of water and residual glue juice, steam drying logs to achieve the required moisture content of furniture, and to achieve the effect of sterilization. The treated logs will not be deformed, moldy, decaying and infested with insects, and the moisture content is basically below 12%. At this point the wood surface with luster, uniform color, fine texture, structure to the middle.

 Two, dry treatment is the first step in furniture manufacturing, is also a key step. How to deal with it? -- Steam drying treatment.  The drying process is divided into three steps:

  1. Preheating treatment: mainly low temperature and high humidity, so that the internal and external temperature of the wood is balanced, and the moisture content is preliminarily reduced;

 2, drying stage: mainly gradually increase the temperature, slowly reduce the humidity, extract the moisture in and out of the wood, make it reach the moisture content we want;

  3, end treatment: after the re-treatment to make the wood inside and outside the same and can be at room temperature, eliminate the internal stress produced in the drying process. 1. Wood batching processing

    After dry treatment, the raw material of solid wood will pass through the processing place of solid wood ingredients: A: Cutting/cutting material; B: dig saw; C: Planer/planer/planer on all sides; D: puzzle; E: Digging/cutting/guiding saw; F: milling machine; G :(copying) lathe; H: Tenon/hole cutting; I: Fluting/carving/sanding. Plate batching processing: A: batching/veneer/patchwork/patchwork; B: Rough cutting/edge clamping/bobbing; C: Cold/hot pressing; D; Finishing/clamping/trimming; E: Coarse sand/fine sand; F: Line forming/edge sealing; G: Beat drill/bench drill; H: Single/double vertical milling; I: Processing center/sand cleaning/manual edge sealing.

 To be firm, sentence, dense, flat, straight.

 (2) note that the use of solid wood parts and wood tenon must be strictly controlled its moisture content.

 (3) to each part bending deformation cracking and other adverse phenomena must be selected and treated.

 (4) Pay attention to the face plate, side plate, door plate, draw the face plate and other wood grain direction and pattern left and right up and down pair, color as far as possible coordinated.

 (5) Half group should check the mold immediately, whether the gear point is loose, wear.

 Group immediately can not be installed, installed wrong, nail, lock, dislocation and other adverse phenomena.

     Contact number: 0579-85190608 15958956969

     Contact number: 13735713828 WeChat: 13735713828

     WeChat: 15958956969

     QQ:   1178196503 

     Email address: shiyufurniture@hotmail.com