Additional tax points for invoicing, contact customer service for details!

This product is a brand new real Masteel shell with pure copper cover. Contact customer service for large quantity! For specific freight, please contact customer service according to the transportation method. Modify the freight price!

Real Horse steel shell is frost-resistant, Shell freeze off can be replaced!!!

Faucet leakage water treatment method
in normal life, sometimes I find that the water of the faucet still drips after tightening, and drips continuously from the outlet of the faucet or the joint, which not only causes a lot of waste, sometimes its noise will also cause some troubles. In fact, the structure of the faucet is very simple. You can repair the leakage by yourself. Generally speaking, the leakage problem only needs to be replaced with a seal types of parts such as the axis gasket or triangle a seal inside the faucet, it can be solved. However, you have to turn off the main tap switch at home before renovation.

As for the repair of water leakage at the faucet joint, the cause of water leakage is nothing more than the sealing tape damage of the faucet part (fixing screws). Therefore, just use the plate pliers to remove the faucet and re-roll the new sealing tape at the place where the screw is fixed. The following are the maintenance steps: first, tie the faucet tightly, turn the faucet counterclockwise with a plate clamp. Second, put the tapping hole outward and roll it 5-6 times with wind-printed tape clockwise on the thread part.

Check whether the faucet has been adjusted. The water clamp is tied in clockwise directions. After the installation is completed, turn on the main switch and try to check whether there will be water leakage.

Even if the faucet is tightly tied, the reason why it still leaks is:

1. The reason for the water outlet leakage: it is caused by the wear of the Axis gasket in the faucet. Use pliers to loosen the gland and remove it. Take out the axis gasket with a clip and replace it with a new axis gasket.

2. The reason for the leakage of the gap in the lower part of the faucet tie: it is caused by the abrasion of the triangle a seal in the gland. You can loosen the screw and remove the bolt head, then loosen the gland and remove it, then take out the triangle seal shop inside the gland and replace it with a new one.

3. Leakage at the joint of the connecting pipe: Generally speaking, the cap nut is loose. At this time, you can re-tighten the cap nut or replace it with a new U-shaped a seal

dear customer, thank you for your attention and support. In order to have a pleasant trading experience, please take a few more minutes to read the following text before shopping, I wish you a happy shopping!
1: How to Order
① contact us online and by phone;
② contact by phone and describe your requirements in detail!
2: about price
all products of our factory are reference prices. If you need to customize them, please consult with customer service. All products are quantity discount.

Shandong Shenglong Trading Co., Ltd. sells wholesale water pump pressure switches, small pressure tanks, water pump four-way, pressure gauge and faucet consumer markets, enjoying a high position among consumers, the company has established long-term and stable cooperative relations with many retailers and agents. Shandong Shenglong Trading Co., Ltd. sells water pump pressure switch, small pressure tank, water pump four-way, pressure gauge and faucet with complete variety and reasonable price. Shandong Shenglong Trading Co., Ltd. has strong strength, attaches great importance to credit, keeps contracts and guarantees product quality. It has won the trust of our customers with its diversified operating characteristics and the principle of small profits but quick turnover.

Contact: manager Liu

contact number: 15318225958

contact Address: No. 28, Zone A1, soil market, Beiyuan Road, Lanshan district, Linyi city in Shandong Provience