F1 foam FIRE extinguisher car foam FIRE extinguisher portable foam FIRE extinguisher water extinguisher FIRE STOP
Packaging information: |
|
---|
1: simple foam fire extinguisher, small in size, convenient to carry and not occupy effective places, with good insulation performance, extinguishing function: it can be used for extinguishing: class A fire (ordinary solid material fire), class B fire (flammable liquid fire), class C fire (gas and steam fire), class E fire (electric material fire), etc. Suitable for all types of vehicles, convenient and safe.
2: this product is a simple type fire extinguisher, with internal membrane foam extinguisher, non-toxic, tasteless, non-corrosive, non-polluting and secondary pollution, which can be biodegradable 100%. It is an ideal fire preparation for vehicles, ships, homes, hotels, offices and shopping malls without special cleaning after use. This product can quickly extinguish the first fire of class A and class B, as well as the fire of general electrical equipment. The fire extinguishing distance is not less than 1 meter. This product adopts binary packaging spray tank, which can be sprayed with all directions at 360 degrees. Its drive gas is compressed air, and does not spray with fire extinguishers. It is a replacement product required by the international Montreal protocol to protect the atmospheric ozone layer.
3. The product is non-flammable, non-explosive, used, stored and transported safely and reliably. When in use, stay 2 to 3 meters away from the flame, remove the safety cover, align the nozzle with the flame heel or oil surface, and press the button. Just shoot. The operation is very convenient.
4. Once the fire extinguisher is opened, it shall not be reused and recharged. Break the tank and let out the gas.
Usage:
1. Tear apart the plastic packaging from the bottom of the fire extinguisher.
2. Press down on the back edge of the cover to open the helmet.
3. Press the yellow button.
4. Spray fire extinguishing from 1.5m to 2m away from the fire source.
Effective injection time: 8 s use or higher temperature: - 20 ~ + 55 ℃ drive gas: nitrogen 1.0 MPa (20 ℃) electric insulation performance: 36 kv or less.