Of the goods: vehicle-mounted foam fire extinguisher

specifications: 500 ml, 1000 ml

Case pack24 PCS:

Product introduction:

Simple foam fire extinguisher, compact in size, easy to carry and do not occupy effective space, with good insulation performance, fire extinguishing function: can be used for extinguishing: class A fire (ordinary solid material fire), class B fire (flammable liquid fire), class C fire (gas and vapor fire), class E fire (with electrical material fire) and so on. Suitable for all kinds of vehicle models to carry and use, convenient and safe.

This product is a simple fire extinguisher, which is equipped with film foam extinguishing agent. It is non-toxic, odorless, non-corrosive, non-polluting and secondary pollution. It can be 100% biodegradable, and no special cleaning is needed after use. This product can quickly put out the initial fire of class A and class B, and also can put out the fire of general electrical equipment. The distance of extinguishing is no less than 1 meter. It has the characteristics of rapid extinguishing, cooling and anti-reburning. This product adopts binary packaging injection tank, which can be sprayed in 360 degrees in an all-round manner. The driving gas is compressed air, which is not ejected with the fire extinguisher. It is a replacement product in accordance with the requirements of the international Montreal protocol for the protection of atmospheric ozone layer.

This product is non-combustible, non-explosive, safe and reliable in use, storage and transportation. When in use, it is 2-3 meters away from the flame. Remove the safety, point the nozzle at the flame heel or the oil surface tangentially, and press the button. Just strafe. It's very easy to operate.

Once the fire extinguisher is started, it must not be reused and recharged. After the use of the waste tank will be broken, let the preset gas out.

Method of use
1. Tear open the plastic package from the bottom of the fire extinguisher;
2. Press down the back edge of the cap and open the helmet;
3. Press the yellow button;
4. Spray the fire from a distance of 1.5m to 2m

Effective injection time: p 8 s
The use of temperature: - 20 ~ + 55 ℃

Drive the gas1.0 MPa: nitrogen (20 ℃)