Product Specification: SMD 0.5W chip 5 3-core 5050 bright SMD (by no means 2-core bulb on the market)

color: red, yellow, blue, green, white.
Interface: T10 socket (bottom diameter of lamp holder is 9mm)
operating voltage: 12V power 2.5W
small reminder: how to detect the circuit as a DC power supply system.
After opening the electric door of the vehicle, turn the switch to the night light state. If you do not need to start the vehicle light, it can be on, which is direct current, otherwise it is alternating current.
All LED lights in our shop need to be used in the circuit system of DC power supply, and AC power supply is easy to damage the LED.
Luminous effect diagram (considering that the vehicle turn light/driving lamp/width lamp needs wide-angle lighting, this car light uses 5 bright SMD 0.5W chips to be distributed on 5 sides to achieve luminous viewing angle)
installation items:
LED lights have positive and negative poles respectively. If they do not shine after replacement, adjust the socket to 180 degrees and insert it.

[Product Note]]:

directly replace the original traditional glass bulb without modifying the circuit. Pay attention to the high temperature of the original bulb to prevent scalding! When installing, refer to the external dimensions of the product, pay attention to the size of the installation location space, press carefully, and do not squeeze the LED chip to avoid damage. LED has positive and negative polarity. If it is not on, adjust the direction and reinstall it;

 [LED features]]:

1. Can directly replace the original car traditional tungsten bulb;
2.LED has high luminous purity without lampshade filtering, and the light wavelength error is within 5 nanometers.
3.LED lighting has no delay, while traditional tungsten bulb has a delay of 0.3 seconds.
4.LED has low power consumption. When it reaches the same luminous brightness of traditional bulbs, the power consumption is only 6% of that of traditional bulbs, and it also plays a role of saving electricity and fuel!
5. With super long service life, its filament-free structure does not heat up, and can be used for more than 6 years in normal environment.
6.LED lights can make the vehicle control circuit not easy to oxidize, 0.1A load current.

 (A) Photoelectric Index at room temperature 25℃

 (B) standard value evaluation results at room temperature 25℃